1. Hp Zr30w Settings Free
2. Hp Zr30w Resolution
3. Hp Zr30w Color Settings

The HP ZR30w is a massive 30-inch IPS monitor with an equally massive price tag. It offers good grayscale performance and wide viewing angles but its lack of picture settings and limited video. Monitor: HP ZR30W Display card: GIGABYTE GeForce GTX 590 3072MB X-Rite i1Display2 colorimeter Hello, I have HP ZR30W monitor (30 inch). As you know this model lacks on-screen menu. 1) I've read that all of the monitor parameters can be set within display card's settings.

User Guide

© 2009 Hewlett-Packard Development

Company, L.P.

Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services . Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.

First Edition (December 2009)

Document Part Number: 595125-001

About This Guide

This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications.

WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.

NOTE: Text set off in this manner provides important supplemental information.

Table of contents

1 Product Features

HP ZR30w Model

The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel. The monitor features include:

●29.7–inch (75.4 cm) viewable area display with 2560 x 1600 resolution

●Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side

●Tilt, swivel, and height adjustment capabilities

●Removable stand for flexible mounting solutions with HP Quick Release and VESA 100 mm mounting holes

●Video signal input to support DVI digital with DVI-D signal cable provided

●Video signal input to support DisplayPort digital with DisplayPort signal cable provided

●USB 2.0 hub with one upstream (connects to the computer) and four downstream (connects to USB devices) ports

●USB cable provided to connect the monitor's USB hub to the USB connector on the computer

●Supports the optional HP speaker bar (purchased separately)

●Plug and play capability if supported by the system

●Security slot provision on rear of monitor for optional cable lock

●Cable management feature for placement of cables and cords

●HDCP (High-Bandwidth Digital Content Protection) copy protection on DVI and DisplayPort inputs

●Software and documentation CD that includes monitor drivers and product documentation

●Energy saver feature to meet requirements for reduced power consumption

●EDID support for Asset Management

●Compliant with the following regulated specifications:

◦European Union CE Directives

◦Swedish MPR II 1990

Hp Zr30w Settings Free

2 Safety and Maintenance Guidelines

Important Safety Information

A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 25 in Appendix C.

WARNING! To reduce the risk of electric shock or damage to the equipment:

•Do not disable the power cord grounding feature. The grounding plug is an important safety feature.

•Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.

•Disconnect power from the product by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor.

CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails.

Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor.

WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury.

Care should be taken to route all cords and cables connected to the LCD monitor so that they can not be pulled, grabbed, or tripped over.

Maintenance Guidelines

To enhance the performance and extend the life of the monitor:

●Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

●Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor. Garageband dmg el capitan.

●Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.

●Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

●Turn the monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use.

NOTE: Monitors with a “burned-in image” are not covered under the HP warranty.

●Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.

●Do not drop the monitor or place it on an unstable surface.

●Do not allow anything to rest on the power cord. Do not walk on the cord.

●Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.

●When removing the monitor stand, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.

Cleaning the Monitor

1.Turn off the monitor and unplug the power cord from the back of the unit.

2.Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.

3.For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.

CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen surface. It may run behind the bezel and damage the electronics.

CAUTION: Do not use cleaners that contain any petroleum based materials such as benzene, thinner, or any volatile substance to clean the monitor screen or cabinet. These chemicals may damage the monitor.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.

3 Setting Up the Monitor

Hp Zr30w Resolution

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below.

NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor.

Installing the Monitor Pedestal Base

NOTE: Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixture; instead see Mounting the Monitor on page 12 in this chapter.

1.Using both hands, position the monitor over the pedestal base.

CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.

2.Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will make a clicking sound.

Figure 3-1Inserting the Monitor into the Pedestal Base

Hp Zr30w Color Settings

NOTE: Be sure the pedestal base is securely locked before continuing with the setup.

Rear Components

HP ZR30w Model

Figure 3-2Rear Components

Table 3-1Rear Components